Lane's SCA - Engine Disassembly (3)

	A top view of the head removed from the block.
	The camshaft bearing caps were removed next.
	The bottom view of a bearing cap shows one of the oil passages.
	A close look of the bearing caps reveals some minor scratches on several of them.
	A view of the camshafts, with the timing chain sprockets still attached.
	The camshaft bearing surfaces were in good shape (even though it looks kind of scratched here).
	The cam lobes had some discoloration, but they were in pretty good shape too.
	Here you can see the valve lifters after the camshafts were removed.
	A closer look of the valve lifters and head's camshaft bearing surfaces.
	The valve springs are visible below the lifters.
	A side/bottom view of a valve lifter - notice the oil passages.
	Looking down into a lifter bore, the valve spring retainer is visible.